Hi to all.

I have got yet another Acer E1 motherboard that I cannot solve.

Everything seems fine, I have all the right voltages, the board is drawing around 450mA when turned on, I have no image on screen. Somebody else tried to reflow the Intel chip.

I also cannot find the right bios for this board, it has only one bios chip - U6, the KBC bios is not present on the board. I have tried couple of images I found on the forum, but no luck, still no image on screen. The battery voltage is also good - 3,1V

V5WE2 LA-9532P
REV: 1A

ENE KB9012QF A3
Intel SR1DU (Intel Celeron 2955U)



What do you recommend I should do?

Thank you!

First try to flash BIOS...

Then CPU and RAM just settle other...

I have tried about 6-7 different bios files. No luck with them. I tried a couple other RAM memories.

CPU chip is the only chip on the board (all in one chip), and it has to be desoldered to be changed. I have no spare one.

Resolved... KBC bios was the problem...