hp pavilion 14-n007ax DA093MB6D0 bios bin required? please

DA0U93MB6D0..

\


See the "BIDxxxxx" at the end of your original main backup, and flash the same.

thanks..

OK i didn't find EC bios separate in this board only one main bios so what you suggest?

after flashing this file now charging battery light on power on/off ok 3v, 5v, 1.5v,1.8v,.8v on cpu 02 coil are ok but no display the missing voltage are on two coil one which is driving by ic ADP3211 i think this is GPU voltage is missing .
the key board Caps-lock light is blinking and wifi red light is continuously on.
so what you experts are advise and i have no schematic for this,if any one have please share.

Not have schematic, sorry.
What is the "BID" you have flashed?
What is the Platform ID of your laptop? (See it under battery.)
Caps Lock Continuous blink - may be AC adapter wrong...
Check CPU, memory, CMOC battery, etc.

Ok thanks
i tested both BID because the old dump was not available the chip was written by wrong file a technician and did,nt backup.
now the working BID02169 because it is normal compare to the other BID0216D.
Under the battery i found...Rev:216E-100 and PCID: 0887100000005E00000600000.
the Caps-lock blink continuously both on adopter and also on battery.
one the thing i want to mention it is AMD processor with AMD graphics BGA.
i think there is something wrong with IC ADP3211 because on the connect coil has no voltage whats your suggestion.

Thanks and i am waiting for your advise.

one thing i want to mention also is the the FAN is spinning continuously.

I think it is for BID0216D, reflash!..
Replace CPU, memory, by 100% working for test. Check CMOC battery.

Check all power voltages on board include all LDO voltages (found everything!).

You will check it using datasheet.
http://www.onsemi.ru.com/pub_link/Colla ... 3211-D.PDF
Define BGA chipset - video, north, south...