требуйте datasheet для kb910q b4 пожалуйста кто-нибудь имеет или может сообщение я

_________________
repairs of laptops and selling of components

Интеречно, что вам даташит даст? Может с южного моста лучше начнете?

_________________
Не бойтесь совершенства. Вам его не достичь. Сальвадор Дали

большое спасибо мой друг

_________________
repairs of laptops and selling of components

guruji, where you from? Can you find good translater? Your speeches are not clear for us.

Dont think that datasheet will help. Anyway, please, respond about a result.

_________________
Pentium-M - это не мобильность... Вот Тополь-М - это мобильность... (с)bor

sorry for my russian as I am from India and i try to translate the russian language from a website that why the russian is not good but pls bear with me .will the ene datasheet i wanted is for many acer and toshiba laptop this one acer had no power there was no 3v on pin 2 of ene kb910 which come from a pull-up resistor was open to 3v not the machine works tm2350.I wish the website was in english too as i could help in many faults we works with only laptop chip level and all kinds .if there is anything i can help pls send mail in english and i will help you
thanks again

_________________
repairs of laptops and selling of components

acer 2350 has many typical faulties, such as: dead southbridge, dead battery charging PWM-controller and broken BIOS ROM(!). i'd suggest to begin with bios rom reflashing.

the problem i have with tm2350 is when you plug the adapter all the lights come on i have reprogrammed the bios but same problem this is a common problem with tm2350 with all lights come on i changed the micom too the kb-910 but same problem .i think the problem is with the south bridge chip as it is not sending pcireset signal.any suggestion

_________________
repairs of laptops and selling of components

this is not a correct relacement.
you MUST change EC to KB910Q B4 only.

_________________
Не бойтесь совершенства. Вам его не достичь. Сальвадор Дали

guruji, if you have lacking of reset signal or "flowing" reset, try to replace southbridge(fw82801DBM, afaik).