Higuys

i have a laptop Asus X551CA recovered from a bricked bios with
dediprog Sf100 programmer on Winbond W25Q64FV.

the bios of notebook is Aptio Ami Bios

The notebook works very fine, but now, in Bios menu not appear Serial
Number and UUID and the mac adress of LAn Realtek are 0000000 with (!) in windows 8.1 .


Exist a solution?

On the mobo there are adesive with informations.


very thanks
Harry

Sorry for my english

мне нравятся америкосы,придут на русскоязычный сайт зададут вопрос на своём языке и все должны им на их нем отвечать,никакого уважения.

DMI - Device Manufacturer Information
There are all sorts of utilities such as "DMI Tools" (for "HP"). Personally, my problem with serial numbers came across only "HP".
То есть я имел дело только с DMI Tools'ом для HP, в основном они ругаются на серийные номера и мак-адреса. По поводу Asus'ов - еще не сталкивался с такой необходимостью.
В интернете наверное есть информация и по Асусам, например тут.
http://forum.notebookreview.com/asus-re ... ge-19.html
Почитайте, заодно и переведете для Сергея Петровича )

...you saved spoiled bios????

_________________
...!!стучитесь....и вас откопают...
...!!knock.. and you will be dug up...

Рабочий международный язык.

...кстате...этот бомбино из Италии...

_________________
...!!стучитесь....и вас откопают...
...!!knock.. and you will be dug up...

ну хоть хорошо ,что на итальяно не спрашивал.

thanks dear boys to have answered me.


Yes, I'm Italian and I have great respect for the russia technology and science that you as the Academy of Sciences.

On this notebook, I used my original rom with the addition of the 210 bios version. But in Aptio Menu does not appear UUID and SN and the module Lan does not work because it does not have the mac address.

Now I read the whole thing, I'll see if I find something

...I asked you...did you dump backup before upgrading???...there could remain necessary data...

_________________
...!!стучитесь....и вас откопают...
...!!knock.. and you will be dug up...

The problem that caused the locked computer was that I unconsciously used the FPT command to load the bios 210.

the computer would not start anymore.

With SPI programmer I did dump the bios blocked and I compared with a full dump of a X551CA rev 2.2 taken from you.

With the program HxD I have seen on dump bios damaged, which offset from 00200000 onwards, there was the entire bios 210, transcribed from 00000000 to this and why not start my pc.

I stitched everything and so now part works fine, but data are lacking UUID, SN and Mac address.

the are some adesive on board with uuid sn and mac address

Very thanks but bt.exe dont work on this model.

need to use bt2.exe

_________________
уволился
------------------------------------------------
ремонт ноутов по снимку платы
снятие паролей BIOSа на расстоянии
приворот winDOвSa

может пригодится кому, из старого дампа x551ca скопировал с 21048d по 2330ff адрес в чистый дамп, перенес mac, sn, uuid, windows key.