finkotbar писал(а):
x551ca rev 2.2.Вложение:
x551ca rev 2.2.zip
hi dear ,
i have loaded this file into dediprog sf100, with manual voltage to 2.5 V.
The chipset bios are Winbond W25Q64FV and in config i have selected:
Batch Operations -> Download a whole file to chip ( without blank check) .
Miscellaneous Menu -> Vcc Option --> 2.5 V
-> Spi Clock Setting --> 12MHz
Flash Option ---> unprotect blocks automatic
but during the flash ( batch procedure) appears this message :
Warning : BLocks are protected
what is your opinion?
Thanks

Ps this is log :
2014-Apr-06 02:26:54: Welcome to DediProg SF6.0.4.30
2014-Apr-06 02:26:54: Start logging ...
2014-Apr-06 02:26:54: Checking Windows version ....
2014-Apr-06 02:26:54: Windows version: Windows 7
2014-Apr-06 02:26:54: Checking USB connnection ....
2014-Apr-06 02:26:54: USB OK.
2014-Apr-06 02:26:55: 0.798s elapsed to identify chip.
2014-Apr-06 02:26:59: Current Type: W25Q64FV
2014-Apr-06 02:26:59: VCC 3.5V is applied.
2014-Apr-06 02:27:07: Advanced settings...
2014-Apr-06 02:27:17: Advanced Settings completed.
2014-Apr-06 02:27:18: VCC 2.5V is applied.
2014-Apr-06 02:27:18: Warning: Enable auto unprotect block.
2014-Apr-06 02:27:18: Warning: Batch with erase.
2014-Apr-06 02:27:34: Loading C:\Users\user\Downloads\X551CAAS210 (1)\chip2.bin ...
2014-Apr-06 02:27:34: C:\Users\user\Downloads\X551CAAS210 (1)\chip2.bin Loaded.
2014-Apr-06 02:27:34: Operation completed.
2014-Apr-06 02:27:34: 0.758 seconds elapsed.
2014-Apr-06 02:27:47: Advanced settings...
2014-Apr-06 02:28:06: Advanced Settings canceled.
2014-Apr-06 02:28:09: Programming parameters:
2014-Apr-06 02:28:09: Source File: chip2.bin(0x800000 bytes)
2014-Apr-06 02:28:09: Target Memory Region: [0, 0x800000)
2014-Apr-06 02:28:09: Spare Memory Region: leave as being erased.
2014-Apr-06 02:28:09: Truncate-File-To-Fit-Memory Disabled.
2014-Apr-06 02:28:10: Identify Chip OK.
2014-Apr-06 02:28:10: Erasing a whole chip ...
2014-Apr-06 02:28:10: Auto unprotect block is enabled
2014-Apr-06 02:28:10: Warning: Block(s) are protected
2014-Apr-06 02:28:10: Unprotecting blocks...
2014-Apr-06 02:28:10: Error: Failed to erase a whole chip
2014-Apr-06 02:28:10: Operation completed.
2014-Apr-06 02:28:10: 0.427 seconds elapsed.